Crane Scale KGW

KGW Crane Scale | Kranwaage | Hanging scale | Hängewaage | Hakenwaage | Hook scale | EHP Wägetechnik GmbH
This robust and shock-resistant crane scale was developed primarily for use in hot temperature ranges. Thanks to a special heat protection housing, the KGW crane scale can be used to weigh hot material with a temperature up to 1,600°C. The crane scale is designed for use in hot environments. In addition, the load cells of the hanging scale are separately shielded and encapsulated in the housing to protect the measuring instruments from the enormous heat fluctuations.

Load-bearing parts of this industry scale are redundantly protected against falling and offer a mechanical safety factor of 5:1 of the rated load. This makes KGW one of the safest foundry scales on the market!
The crane scale can be operated remotely up to a distance of 30 m. During the casting process, the "subtractive tare function" facilitates your processes and helps to avoid casting errors.
All models can be upgraded with numerous accessories such as weighing data receiving units.

All EHP crane scales have a mechanical safety factor of 5:1 - this means that our scales carry five times the nominal load without tensile components breaking. Compared to almost all competitor products, our crane scales are not only certified for weighing. Due to their high safety standards, EHP crane scales can also be used for goods transport (according to EN 13155).
 
<


Other weighing ranges available on request.
  • Highest measuring accuracy of 0.03% of the final value
  • 3-year warranty on accuracy and function of the load cell
  • 50mm LED display
  • Non-destructive steel housing in foundry design for hot operation
  • Fast advertising results
  • Automatic switch-off
  • Remote control included
  • Calibration certificate included
  • Heat protection included
  • Fall protection and high impact resistance
  • High-quality, long-term stable strain gauge load cell as load sensor
  • Microprocessor-controlled weighing electronics
  • No tare force - can be tarred over the entire weighing range.
  • Mechanical safety factor of 5:1 of the rated load
  • TÜV-tested, according to DIN 15402 / DGUV A1
  • Approved hoist assemblies and chain components
  • Optional accessories such as weighing data units available
  • Protection class IP 54
  • Foundries (dosing, mixing in combination with magnets, spheroidal graphite, grey cast iron, etc.)
  • Retrogressive weighing during dosing processes etc.
  • Weighing of rolls, steel, coils, sheets and coils